Four DSP-based oscillators plus one sine wave sub oscillator
Four classic wave shapes (saw, square, triangle, sine) per oscillator
Twelve selectable complex shapes per oscillator
Three noise types per oscillator: white, pink, violet
Shape modulation/pulse width/superwave detune amount
Oscillator cross modulation: frequency modulation (FM) and amplitude modulation (AM)
Hard sync, individual Glide, Oscillator Slop
True 4-voice paraphonic mode with individually-gated envelopes per oscillator
Five high-quality digital effects. Thicken the signal and add harmonics or completely destroy the signal pre-filter.
Girth and Air are high and low shelf equalizers with harmonic excitement. Useful for thickening and/or adding air to the signal.
Hack and Decimate are sample and bit rate reduction algorithms which can add subtle grit or completely trash the signal. It’s harsh yet musical.
Drive is a soft saturator for adding soft distortion and harmonic content to the signal
Dual analog filters operate in serial or parallel
Filter 1 is a 4-pole resonant analog low-pass filter inspired by the original Prophet-5 filter.
Filter 2 is a 2-pole resonant analog state-variable filter inspired by the Oberheim SEM filter and can be continuously varied between low-pass, notch, and high-pass operation, with an optional band-pass mode.
Oscillator Split allows oscillators 1 & 2 to be sent to Filter 1 and oscillators 3 & 4 to Filter 2.
FEEDBACK AND DELAY
Three-tap syncable delays with feedback and amount controls, pan, and high-pass and low-pass filtering, all per delay. A separate fourth delay is a digital bucket-brigade delay (BBD) for analog-style effects.
Five Delay + ADSR envelopes (Filter 1, Filter 2, VCA , and two Auxiliary envelopes)
Auxiliary envelopes 4 and 5 freely assignable to multiple modulation destinations
All envelopes can repeat/loop
Four syncable LFOs with phase offset and slew per LFO
16 x 2 modulation matrix with over 50 mod sources and over 140 mod destinations
Modulation assignment buttons enable quick and easy modulation routing.
Mod Matrix runs up to audio rates.
CONTROL VOLTAGE I/O - GATE OUT
Four 1-volt-per-octave control voltage inputs and outputs for interfacing with modular synths and other CV-compatible devices
Parameters that can be sent to CV outputs include oscillators, LFOs, envelopes, sequencer tracks and any other source within the modulation matrix. Runs up to audio rates
Gate Out for triggering external CV-compatible devices; any CV in can be used as a gate input.
Advanced step sequencer with two modes: 16 steps x 16 tracks or 32 steps x 8 tracks
Supports real-time input, rests, and variable-length sequences
Syncs to MIDI clock and external audio and CV input
Sequences can control not only oscillator pitch but any parameter in the modulation matrix.
Sophisticated arpeggiator with up, down, up+down, random, assign modes
Syncs to MIDI clock and external audio and CV inputs
Stereo analog distortion
More than 50 knobs and 65 buttons enable deep and comprehensive editing with minimal menu diving.
Backlit pitch and mod wheels are easily visible in low-light situations and have a smooth yet precise feel and response.
Independently adjustable upper and lower pitch wheel range
Two assignable position- and pressure-sensitive latchable touch sliders for enhanced interactivity and control
Full-sized, three-and-a-half-octave, semi-weighted keyboard with velocity and aftertouch
396 user and 396 factory programs
Playlist mode for generating easily accessible setlists of your favorite programs
1 MIDI In, 1 MIDI Out, and 1 MIDI Thru/Out 2 port
USB port for bidirectional MIDI communication
4 CV inputs (4 x 1/8″ jack)
4 CV outputs (4 x 1/8″ jack)
1 Gate Out (1/8″ jack)
1 Sustain/footswitch input
1 Expression pedal input
1 External audio input (1/4″ phone jack)
Main stereo output (2 x 1/4″ phone jack)
Headphone out (stereo 1/4″ phone jack)
1 universal IEC AC power inlet for internal power supply
Operates worldwide on voltages between 100-240v, 50-60Hz, 30 watts maximum power consumption
Walnut end panels and trim
29.2″ L x 12.8″ W x 4.15″ H (74.2 cm x 32.5 cm x 10.5 cm)
18.7 lbs. (8.5 kg)