FLAMINGO
Stereo Microphone Preamplifier
I/O Connectors
Input:
The maximum input level for the Flamingo is +18 dBm with the unit’s gain set at 6 db. The input is balanced with pin 2 being signal positive and pin 3 signal negative. The input connector is a XLR connector.
Output:
The maximum output level for Flamingo is +25 dBm. The XLR connector is wired with pin 2 hot or signal “+”, pin 3 signal negative and pin 1 signal ground. If it is necessary to run the output unbalanced, tie pin 3 to pin 1 at the XLR connector.
Power:
100, 120, 230, 240 volt; 50/60 Hz; 45 watts
MDL 0.3A Fuse for 230V and 240V
Pilot Lamp: # 7335
Shipping Weight: 15 lbs. (8.6 kg)
Depth Behind Panel: 10 inches (31.75 cm)
Panel Height: 1 rack space
Input Impedance: 8.5K ohms