- Flyline Music AG

Direkt zum Seiteninhalt


Produkte > Mikrofone > Vanguard Audio Labs > Accessoires
Heavy-Duty Small Shockmount

- Heavy-Duty Shockmount aus Messing und Zink
- Ersatz Shockmount für V1
- Gummiringe aus Material für Raumfahrt
- 36.5mm max. Innenmass für Kleinmembranmikrofone

The Vanguard VSSM is a heavy-duty, professional-grade shockmount designed to give your mics long-lasting, high-grade support.

Re-Imagined Design
While our chief engineer was the first  to popularize the “tube” style shockmount for pencil condensers, we felt  we could build a better version and really give you the best possible  isolation mount for your microphones.

First, we widened the inner diameter to  37.5mm, which will safely support microphones with up to a 30mm  diameter. This means all of your pencil condensers, as well as several  popular ribbon microphones and medium-diaphragm condensers, will be  safely and comfortably supported by the VSSM.

Then we added a 240º window to the VSSM  body. This allows you to easily access a pad, rolloff, or pattern switch  on the microphone without affecting placement.

We also wanted to get rid of the  aggravating experiences with those flimsy elastic bands that come  standard with most shockmounts. They get stretched out and saggy, and  sometimes snap without warning – not something you want to happen when  your mic is in there! Instead, we install aerospace-grade rubberized  suspension rings that won’t break, sag, crack, or stretch over time. We  picked a precise durometer for the suspension rings that will firmly  support even the heaviest microphones, while still maintaining superb  decoupling properties to prevent unwanted rumble and vibration.

The bands can be crossed either  horizontally/vertically or diagonally to provide a more secure grip to  differently-sized microphones.

We use a heavy-duty zinc alloy for the VSSM body and knob. There’s no  brazes or welds that can weaken over time. Instead, each component is  precision-cast.

We chose to make the pivot out of impact-resistant ABS thermoplastic  polymer to provide superior friction. This will keep the microphone from  slowly sliding out of position.

The threaded part of the knob, as well as the dual-threading  (American 5/8″-24tpi and European 3/8″-16tpi) in the pivot, are machined  from brass.

The VSSM is finished with a durable heat-cured powdercoat, colored matte black.

Wide Compativility
The VSSM comes as a standard accessory for the Vanguard V1 Multi-Capsule Pencil Condenser Kit.  However, it is a superior shockmount for a wide variety of condenser,  ribbon, shotgun, and dynamic microphones from several brands, with a  diameter of up 30mm. Consult the list below to see compatible microphone  models:

Advanced Audio – CM1084
C451, C460, C391B, P170
AMT – AMT404
Audio-Technica – AT2021, AT4041, AT4021, AT4022, AT4051, AT4053B, AT8015, AT8035, AT875R, AT897, ATM450, Pro 37,
Audix – f9, f15, ADX51, TM1
Avantone – CK-1
Behringer – B-5, C-2, C-4, ECM8000
Beyerdynamic – TG I53, MCE 72,
Blue – Hummingbird,
CAD – C9, GXL1200BP, ICM417
DPA – 4011A, 4006A, 4091
Earthworks – DP30-C, P30C-B, P30C-W, SR20/25/30/30HC/40/40HC, TC20/25/30QTC30/40/50
Electro-Voice – PL37
GoldenAge – FC4
Lauten – LA120
Miktek – C5
Mojave – MA100, MA101
MXL – 991, 993, 603S
Nady∫ – CM88
Neumann – KM84/85/86, KM183/184/185,
Oktava – MK012, MC012,
Peluso – P84, CEMC 6
Røde – NT4, NT5, NT55, M5, NTG1/2/3
Royer – R-121, R-121 LIVE, R-122 MKII, R-122 MKII LIVE, R-122V, SF12
Samson – CO2
Schoeps – CMC641, Collette, CMC6
sE Electronics – sE5, RN17
Sennheiser – e614, e914, MKH 40, MKH 50, MKH 800, MKH 8040 (w/ XLR Module only)
Shure – Beta 181, SM81,  SM94, SM137, KSM37
Sterling – S30,
Studio Projects – C4
Telefunken USA – M60/61/62, ELA M 260

…and many more. If your microphone has a  diameter less than 30mm and a length greater than 65mm, it will most  likely be compatible with this shockmount.
Copyright 2017. All rights reserved.
Zurück zum Seiteninhalt | Zurück zum Hauptmenü