- Flyline Music AG

Direkt zum Seiteninhalt


Produkte > Accessoires > Cloud Microphones
Cloudlifter CL-Z
Variable Impedance Microphone Activator

- 2-stufiges Gain, bis +12 oder bis +25dB
- Variable stufenlose Input Impedanz
- Variabler Low Pass Filter von 20 bis 200 Hz
- Für dynamische und Bändchen-Mikrofone
- Entlastet den Vorverstärker
- Low Pass Filter
- Speziell für mittelklassige Audio Interfaces geeignet

Upgrade the Potential of Your Microphone and Preamp
Cloudlifter® Mic Activators® use phantom power from your preamp to  solve an array of common issues with microphones. Cloudlifters provide  up to +25dB of ultra-clean gain, maximizing the microphones’ signal  strength and clarity, which lowers the noise floor and amount of gain  required with any preamp. By allowing preamps to operate in a more  comfortable gain range, the frequency response remains more intact and  the self-noise of the preamp is reduced.

Character Control with Variable Input Impedance Loading
The CL-Z provides up to +25dB of ultra-clean gain, variable input  impedance and a variable high-pass filter. Having an input impedance  control that is sweepable from 150 ohms to 15k ohms allows you to  creatively load the microphones’ output transformer, with the result  being a wide range of new tonal variations becoming available to each  mic.

Variable High-Pass Filtering = Proximity Effect Control
The variable high-pass filtering works in conjunction with the  impedance value, allowing for even more tonal shaping and control. When  engaged, the frequency cutoff is affected by the impedance setting. This  allows for a sweep-able frequency cutoff range from below 20hz to  approximately 200hz, just by turning the “Z” knob. This can be  especially useful for tonal shaping or reducing the proximity effect of a  ribbon or dynamic microphone.

Variable Gain
The CL-Z has a two-position gain switch allowing for more gain, or  the maximum gain available. Most of the time the MAX (approx. +25db)  position will be used, however, the reduced gain setting (approx. +12dB)  may be useful in situations where the source does not require as much  gain, or where more of the preamps’ color from additional gain is  desired.

– High-Pass Filter frequency is variable from 20hz to 200hz
– Dual gain settings allow for a +12dB or +25dB increase
– Increases gain before feedback ratio
– Easy to use design requires only P48 phantom
– Compatible with tube or battery driven microphones
– Protects any passive ribbon with no transfer of phantom
– Utilizes Patent Pending Class A ,Discrete JFET circuitry
– Rugged, road ready and portable
– Free lifetime limited warranty for parts and labor
– Handcrafted entirely in the USA

Responsibly Manufactured to Last a Lifetime
The CL-Z, like all Cloudlifters and Cloud® Microphones, carry a  Limited Lifetime Warranty to the original owner, with product  registration, and are completely made in the USA, using environmentally  responsible methods