Studio Equipment
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 Rupert Neve
5014 NEW
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Technische Spezifikationen
|
Total Harmonic Distortion and Noise: @ 2 kHz, +20 dBu output level, unity gain. Main Output, Width bypassed: Better than 0.0015%. Main Output, Width engaged: Better than 0.0015%.
Noise: Measured at Main Output, un-weighted, 22Hz-22 kHz, Terminated 40 Ohms. With Gain at Unity, Width disengaged: Better than -100 dBu. With Gain at Unity, Width engaged: Better than -96 dBu.
Frequency Response: Main Output, Unity Gain @ 18 Hz, -3 dB. @ 150 kHz -3 dB.
Crosstalk Measured Channel to Channel, Width disengaged: Better than -100 dB @ 16 kHz.
Insert: The Insert is only active within the WIDTH circuit when it is engaged. The SEND carries the Left-Right difference information only (pre-EQ). Return is half-normaled.
Total Harmonic Distortion and Noise: @ 2 kHz, +20 dBu output level. Better than 0.0015%.
Frequency Response: Main Output, Unity Gain 10Hz - 100 kHz, +/- 0.50 dB.
SEND
Maximum Output Level: Balanced TRS +28 dBu. Unbalanced +22 dBu.
Send Amplifier Noise: Un-weighted, 22Hz-22kHz, E.I.N. (Equivalent input noise, Terminated 40 Ohms -100 dB
RETURN
Maximum Input Level: Transformer balanced, floating +25 dBu.
Input Impedance: >10K Ohms
5014 Power Requirements:
|
| Voltage Range, 9 to 18 Volts DC, 12 Watts |
| Connector: 5.5mm X 2.5mm DC jack, Center Positive |
| Current consumption: @ 9VDC = 1.25 A typical @12VDC = 1000 mA typical @15VDC= 780 mA typical @18VDC= 643 mA typical |
| *External 15V Supply included with every Portico Series module. |
|
|
|
|
